Ich liebe diese Karten 
3dfx Grafikkartenbilder thread
-
-
Nette Karten, funktioniert die Karte mit DVI?
Der eine Kühlkörper klebt schief.
Kannst dem BIOS der Karten ein Backup machen? Falls die Bios Versionen noch nicht vorhanden sind: -
Ersatzteilspender
-
Pflaster für die Einfahrt!
-
-
ROFL!!!
-
-
Sehr schön, so hatte ich mir das vorgestellt!
-
Ich liebe diese Karten
consider replacing memory modules to toshiba with -54 rating (as on aalchemy). it will give a more natural look. anyway, these cards are not for overclocking.
-
Ich liebe diese Karten
consider replacing memory modules to toshiba with -54 rating (as on aalchemy). it will give a more natural look. anyway, these cards are not for overclocking.
For all I know only 6nsHyundai or 6ns Toshiba was used for all 5500's incl the 5500 AGP x4 boards.
Toshiba 5.4ns was used on the following cards:
3dfx Voodoo5 6000 AGP 128MB Rev.A1 1500
3dfx Voodoo5 6000 AGP 128MB Rev.A2 2600
3dfx Voodoo5 6000 AGP 128MB Rev.A3 3400
And Hynx 5.5 ns SDRAM was used on a handful of 3dfx Voodoo5 6000 AGP 128MB Rev.A2 2600's.
The Q3D AA5 boards kind of stood loose from the 5500's as VRAM ns went, they did use the 5.4ns Toshiba that is what I too can confirm. -
My card has SAMSUNG chips...
-
My card has SAMSUNG chips..
Hmm nice, did you put those on the card yourself as in likea VRAM replacement or they they come with it?
Is this a 5500 AGP x2 or x4 model, just wondering tho! -
Nobody replaced the RAM chips. They are original.
This card must have had a bad life before I bought it few years ago. Nothing on this card worked as expected. So I reworked the buck converter part (power supply), because the transistors all were dead (short circuit to the 5 and 12 volts).
Well... Nothing happend. So I spoke to Backfire and after a few measurements we both came to the conclusion, that the VSA were dead too. So they were replaced by oskhar and now the card works fine again.
-
That is very cool, grats man! Always amazing to have people that can help out and know how to as well
We gotta consider ourselves very lucky to know such people tbh, getting to Hank isn't easy these days with people like Anthony, Backfire & osckhar there is always a way to get such things properly attended to.
Always good to see an other V5 getting back to life again, but yea Samsung memory on a V5 this is a first for me
thanks for sharing, looks nice!
Currently my EP-8K7A+ is at Backfire's place now, to replace it's 20pin mainboard connector, it suffered a power arc of some kind.
No more Antec PSU's lol still seeking an Enermax EG365P or EG 425P something in that range that offers a 36Amp +5 volt rail.
You can see the pics here:
RE: My system reboots without reason after 1 to 3 hours of use, PSU maybe?
Just hoping all goes well even I know it is in the best of hands
all the rest of the hardware is in healthy shape, thankfully.
I hope you been doing well CryptonNite -
Hier auch mal meine Quantum3D 100SB-4440V. Die 2D Einheit hat gesponnen, da die Ferrite gebrochen waren. Die Drähte werden noch gegen 330nH Induktivitäten getauscht, sobald mein Mouser Warenkorb gefüllt ist…
.
