Backfire's V4, V5 5500 und V5 6000 Reparaturen und deren Ursachen

  • Eieieiei, zuviel Harald Lesch geguckt Jungs ?

    Mal ohne Spass, mal butter bei de Fische, interessant ist das schon wie das funktioniert, ich bin zwar kein Optik Typ, aber die Technik ist interessant.


    Gruss Dennis

    PS: Zeit ist nur dazu da, damit nicht alles gleichzeitig passiert :topmodel: (wobei das ziemlich geil wäre, jede Grafikkarte währe gleich schnell, weil man überlege mal FPS wäre halt völlig irrelevant und man könnte die jüngsten Games auf ner FX5200 Zocken in 4K)

  • Ich hätte da vielleicht auch noch ein oder zwei Karten ;(. Aber mir fehlt ein bisschen die Zeit zum Kramen :) Hauptsache du hast noch nicht den Spaß daran verloren :D

  • Hey -

    - nein, auf keinen Fall! :)

    Ich liebe es das zu tun. Die Karten zu reparieren, zu erhalten. Ja - man könnte sagen das es mich süchtig gemacht hat. :topmodel:

    Was ich liebe zu tun, das tu' ich mit Herz.

    Es ist wie im "richtigen Leben" - da trifft man immer mal auf einen Blindgänger. Davon lasse ich mir aber nicht meine Leidenschaft sauer fahren.

    Also - nur zu. :saint:

    <3

    - Backfire -

  • Mal aus dem Off: Ich finde das richtig, richtig cool, Backfire. Ich lese in den Reparaturthreads immer nur passiv mit, mangels Bedarf hab ich da nichts zu melden. Aber man merkt dass Du da mit Herzblut drinsteckst, und dann ist es auch noch ein Dienst für die Community, der dafür sorgt dass sie noch länger in gelebter Nostalgie schwärmen darf.

    Weiter so 8)

    We are Microsoft of Borg. Assimilation is imminent. Resistance is... Error in Borg.dll. Press OK to abort.

  • Backfire 5. Juni 2021 um 06:25

    Hat den Titel des Themas von „Immer mehr V5 5500 und V5 6000 Reparaturen - Ursachen“ zu „Backfire's V4, V5 5500 und V5 6000 Reparaturen und deren Ursachen“ geändert.
  • Backfire, for me it is a pleasure too. I like your whatsapps in the morning. This man does not sleep, all the time working. :)

    voodooalert's users - you are in very good hands. Backfiere takes really good care of you. A lot of passion in his work.

    Hug,

    Oscar.

    Yaaas dow <3

    Backfire even saved my pc flashed 3dfx Voodoo5 5500 PCI Macintosh 64MB Rev.A1 2900 with a VRAM Replacement for the main VSA and did some other fantastic things new industrial coolers, the power supply controller chips were also renewed

    First the card was in Adelaide, South Australia there it went through the two following things by a friend of SWZSSR aka Declan :thumbup::spitze:

    01. Full Polymer Recap
    02. Burnt Copper Heatsinks for the VSA's rear side


    Then when it came back, after 4 a 5 days VRAM issues started to appear, this can always happen to hardware new and old not blaming anyone for it.
    But I do have some hypothetical theories on that, I mean if the card was tested more thoroughly. these defects could of been detected, just me tho :|

    No matter, I made a topic here at VA since well this is where everyone is and i didn't know what else to do, to send DM's to people all of a sudden wasn't on my mind, I made my topic here:
    Strange vertical lines with my V5 PCI mac during bootup

    When Backfire got the card he took a good look at it and he did the following to it :thumbup::spitze:
    01. Renewed Ceramic SMD's on the rear
    02. 6ns Hynix VRAM renewal for the main VSA
    03. Renewed Heatsinks & Fans for the VSA's topside
    04. Renewed Power Supply Controller Chips


    So yea now the card is 200% healthy again all thanks to his secure work, and I am sure many of you here are very thankful that someone is looking out to help out and heal the cards that are in need of it <3

    Here my V5 PCI Mac as of now, she's flying like no tomorrow:

    All good here :)

    Einmal editiert, zuletzt von Gold Leader (22. Juli 2021 um 09:42)

  • Hier ist mal ein Beispiel was gar nicht so selten vorkommt.

    Bei dieser Voodoo Karte wurde es gut gemeint, was aber der Karte das Leben gekostet hat, weswegen sie nun hier ist.

    Silberhaltiges Wärmeleitmittel. Im Laufe der Zeit, durch Bewegung, Handhabung und Temperatur hat es sich bis zum Power Supply verteilt.

    Das Ergebnis ist, dass das Power Supply ausgefallen ist und die Karte voller Isolationsfehler ist.

    [Bitte niemals leitendes Compound verwenden]

    Ideal ist gutes 2K Compound oder das Silverbead SG100XS, das (entgegen seines Namens) nichtleitend aushärtet. Danke für diesen Tip, Wuuki - das Zeug ist der Hammer.

    Es hat sich bereits hundertfach bewährt.

    Wenn Ihr also einmal den Kühlkörper neu aufkleben wollt - reicht das absolut aus.

    Wenn Ihr einen anderen aufsetzen wollt, der an der Karte mithilfe der Löcher gehalten wird, dann genügt ganz normale weiße Wärmeleitpaste aus dem Bereich der Elektronik.

    - Backfire -

    Ach - PS:

    Wenn man das silberne Zeug hier auf dem Bild an den Fingern hat und einen Abdruck auf der Hardware hinterlässt wo es mit Kontakten in Berührung kommt, hat man einen Isolationsfehler von ca. 1KΩ pro Millimeter.

  • Isolationsfehler

    Weil das gerade kurz Thema ist - diese können sich z.B. so äußern

    Das Verhalten der Karte ist an sich ok, und sie stürzt auch nicht unbedingt ab.

    Aber das Bild zeigt eben doch deutlich Störungen.

    Das kann völlig unregelmäßig und überall im Bild auftreten. Ungeachtet der Bertiebsart oder Auflösung.

    - Backfire -

  • Well today at x-3dfx I did a shout out for your awesome work Backfire.


    Hereby hoping to help spread word, if you want this removed I will gladly do that as well.
    I could add a link of your site to that post if you want me to as well, that site you made has tons of vital information that can aid 3dfx users with amny things that can or may run in to,, major thanks for making that place <3

    At x-3dfx we support such projects big time :respekt:8)
    https://www.facebook.com/groups/x3dfx/

    Einmal editiert, zuletzt von Gold Leader (22. Juli 2021 um 11:01)

  • I ain't using FB since years. Is there a big 3dfx community alive?

    Maybe because of that it would be worth going back. But I still have security concerns about FB.

    Thanks for doing advertising, it will show how that works. Doesn't the market have to be saturated at some point?

    - Backfire -

  • Yea well I am the one running the x-3dfx community there alongside my 2CPU community and the Boeing 747 Community but also my Paleontology community with 1400 members. x-3dfx has currently around 614 members and is quite active, other activity is at Victor Bart's place with 14.000 members for his Retro machines, Victor is also a friend of mine from Amsterdam.

    I too could leave FB but since all my friends use it as well I don't have any reason to leave besides once online it won't matter what site you join your private info is always leaked especially when using an OS like Windows 10 or later.

    if it's not facebook, it's Microsoft that should be look at and not past, so in the end I really stopped caring for that, there are much worse things to get all worried for anyway :)

    Einmal editiert, zuletzt von Gold Leader (22. Juli 2021 um 22:53)

  • Backfire, Deine Arbeit ist sehr beeindruckend, und der Thread macht sehr viel Spaß zu lesen. Danke für Deinen Einsatz, die 3dfx-Karten am Leben zu erhalten. Ich muss mal mein Lager durchsuchen, da waren auch noch ein paar Karten mit Bildfehlern, wo ich nicht mehr weiter wusste.

    We are using it to make a difference.

  • Größten Respekt auch für das Reverse-Engineering der Spannungsversorgungsschaltungen. Das Problem mit den alten Kondensatoren ist nicht zu unterschätzen. Wenn Spannungsregler wegen kaputten Kondensatoren ihre Arbeit nicht mehr machen können, kann man an den daran angeschlossenen Bauteilen für nichts mehr garantieren. Hast Du Lust, die Schaltpläne online zu stellen, oder möchtest Du diese lieber für Dich behalten?

    Elektronik, vor allem Elkos, altern leider. Die Voodoo Karten sind mittlerweile über 20 Jahre alt, ein Austausch der Kondensatoren ist in dem Alter schon sinnvoll.

    Sehr schön gefällt mir auch die Reparatur des abgerissenen Lötpads.

    Wie sieht es denn mit der Ersatzteillage aus? Hast Du Probleme, die ICs oder Bauteile noch zu bekommen?

    Ich repariere gelegentlich alte Digitaltachos aus den 80ern (siehe Bild). Dort kommt man noch super an alles ran, aber ICs, die seit '92 nicht mehr produziert werden, sind teilweise leider nicht mehr zu bekommen. Ich arbeite dann mit Ersatzschaltungen, oder neueren ICs - funktioniert, sieht aber aus wie Kraut und Rüben. Es ist wahrscheinlich sinnvoll, sich die kritischen Teile auf Lager zu legen.