Nur zu Info: BTX ist mitlerweile schon wieder tot
Zeigt euer Case! (ehem. "Mein Rechenknecht")
-
-
Nur zu Info: BTX ist mitlerweile schon wieder tot
Zum Glück
-
Stimmt das wirklich? Ich war der Meinung, daß viele OEM Maschinen immer noch im BTX Formfaktor daherkommen...
-
Tun sie auch, vor allem die Aldi Krücken.
-
So weit ich weiss, hat Intel BTX wieder abgeschrieben. Seit dem P35 werden auch keine BTX Boards mehr produziert.
Deswegen ists wahrscheinlich auch Mode, in ATX Gehäusen jetzt das Mainboard "auf dem Kopf" einzubauen oder das Netzteil nach unten im Gehäuse zu verlagern -
na im meinen Lian Li sind auch die Netzteile unter dem Mainboard verbaut. ich finde das verdammt sinnvoll!
-
Nice setup Eye-Q very clean build too man!!!
though that fan does mess it up a little imho, you need a side fan in the side of your case, would make it alot neater like I have with the Dual 2380 C2 , like this
[Blocked Image: http://www.3dfx.ch/gallery/d/36600-2/The+Dual+Opterons+from+Dual+2380+C2+to+Dual+285+E6+to+Dual+248+CG.JPG]Okay that fan was placed there because I had the part from lian where it was made in, if you don't have this you could mod it yourself, the reason for the fan being in the side of the case, is that it sucks away the hot air from the AGP / PCI / PCI-E cards, thereby keeping more heat out of your case, which is obvious when comming to think about it
If you are going to use Plexiglass, you could mod a 120mm x 120mm x25mm fa in the side at the height of the main VGA card like Lian did with their design
Just an idea, it is more work but it would lead to a much neater result
-
Okay that fan was placed there because I had the part from lian where it was made in, if you don't have this you could mod it yourself, the reason for the fan being in the side of the case, is that it sucks away the hot air from the AGP / PCI / PCI-E cards, thereby keeping more heat out of your case, which is obvious when comming to think about it
If you are going to use Plexiglass, you could mod a 120mm x 120mm x25mm fa in the side at the height of the main VGA card like Lian did with their design
Just an idea, it is more work but it would lead to a much neater result
Well, the thing is that the RAID-controller needs airflow (it's originally meant for servers which provide good airflow), and if a fan in the sidepanel sucks the air out there isn't enough airflow. If the fan blows in it destroys the airflow from the front bottom to the rear top of the case. -
so, mal zur abwechslung was aus deutschland in deutsch:
[Blocked Image: http://img30.imageshack.us/img30/728/1130040.jpg]nachdem ich das eine oder andere teil für fotos ausbaute, hatte ich beileibe keine nerven mehr, das alles wieder zusammenzupfuschen. daher kurz entschlossen meine gute alte aeroengine "flachgelegt" und bestückt.
etwas naiv war ich wohl bzgl dem kühler. bis mein neuer zalman kommt, hab ich dem boxed mal seine premiere verpasst. ein sack von kühler
kurz nach dem hochfahren im idle schon höhere temps, als ich sie mit meinem thermalright je erreicht hab.
[Blocked Image: http://img268.imageshack.us/img268/1637/1130042.jpg] -
Ich find' das interessant!
Erinnert mich aber irgendwie auch ein kleines bisschen hierran:
[Blocked Image: http://www.kollektiver-lansinn.de/images/030831_02.jpg] -
Was in Gottes Namen ist DAS denn? rofl. Leichter Aluminium-Overkill?
-
Was in Gottes Namen ist DAS denn? rofl. Leichter Aluminium-Overkill?
... Gewicht heben in "MIttelschwergewicht"
-
[Blocked Image: http://s6.directupload.net/images/090820/btflftxo.jpg]
Die Casio Exilim ist der größte Dreck
[Blocked Image: http://s6.directupload.net/images/090820/vhaob4cc.jpg]
-
sehr schöne fotos. Und so aufgeräumt! Im tower
-
Der Ausgleichsbehälter sollte normalerweise an einem relativ hohen Punkt des Wasserkreislaufs sein und nicht am tiefsten Punkt.
Ich hätte die Pumpe eher auf einen (ggf. selbst eingezogenen) Zwischenboden in die 5 1/4"-Schächte oder über das Netzteil platziert, dann hättest Du auch die 3 1/2"-Schächte frei und könntest die beiden Festplatten dort einbauen, so dass vor dem Netzteil nicht so viel Kabel rumhängen.
-
ja, da sieht alles echt sehr schön und aufgeräumt aus.
-
Danke Leute
Die Pumpe hat im Zusammenspiel mit dem AB anfangs geleckt. Und sie dann über Bauteile zu plazieren wäre keine gute Idee.
Genug Leistung hat sie allemal. Hat auch schon durch ne Graka gepumpt.
-
Very neat and clean build rookz !
also that GTX 280 you have there looks dust free!
-
Endlich keine Platzprobleme mehr. Das Rebel12 ist echt geräumig! Gerade die untere Graka dürfte nun deutlich kühler bleiben... die war ja vorher direkt am Gehäuseboden.
Einzig die zwei SSD da unten wirken etwas verloren[Blocked Image: http://www.abload.de/img/sys220809o2xy.jpg]
-
Hat es keinen 3,5" Schacht?
Sieht aber echt aufgeräumt aus!
und verflucht schnell
-