Guess the project

  • After the AA5 PSU, it is time for the next project teaser. Anyone care to guess what it is?

    For those that already saw it on Facebook please don't write for now. I will reveal it later on.

    So what do you guys think this is:

  • Ich habe nicht die geringste Idee, also werde ich einfach wild herumraten. Ich denke ich werde komplett falsch liegen, aber was soll's. ;) Ich denke das könnte eine Videosignalverarbeitungs- und vielleicht Konversionsplatine sein. Analog zu digital vielleicht? Wobei da zwei Ausgänge drauf sind.. was sind das für welche? HDMI? DP? Multimonitor? Aber wie?

    Der Spartan-7 kann sicher als Videosignalprozessor verwendet werden, aber wer weiß was du wirklich damit anstellst. Der kann ja noch einiges mehr so wie das aussieht.

    Fazit: Überhaupt keine Idee! :P


    I don't have the faintest of ideas, so I'm just gonna guess around wildly. I assume I'll be completely wrong, but whatever. ;) First, I think this might be a video signal processing and maybe conversion board. Analog to digital, maybe? But then again, there appear to be two outputs.. what are those? HDMI? DP? Multi-screen? But how?


    The Spartan-7 can surely be used for video signal processing, but who knows what you're actually doing with it. It's more flexible than that it seems.

    Bottom line: No freaking idea! :P

    1-6000-banner-88x31-jpg

    Stolzer Besitzer eines 3dfx Voodoo5 6000 AGP Prototypen:

    • 3dfx Voodoo5 6000 AGP HiNT Rev.A-3700

    [//wp.xin.at] - No RISC, no fun!

    QotY: Girls Love, BEST Love; 2018 - Lo and behold, for it is the third Coming; The third great Year of Yuri, citric as it may be! Edit: 2019 wasn't too bad either... Edit: 2020... holy crap, we're on a roll here~♡!

    Quote Bier.jpg@IRC 2020: "Je schlimmer der Fetisch, desto besser!"

  • Since you've posted this thread in the 3dfx Sub-Category, i would say it is a VGA to HDMI and / or a VGA to DisplayPort conveter.

    so you can run e.g. a Voodoo 5 (which doesn't have DVI ) on a modern large TFT display.

    But, now when i take a second look - why is there such a black square on the board ? You censored something ?

    IBM ThinkpadX31 der kleine Pinguin für unterwegs
    2x AMD Opteron 246 (ehm. 244er) 4 GB RAM, Tyan K8W Tiger eine "Troye" Linux Workstation für den Power-User,Debian, 7 3.2.0-4 amd64
    Thinkpad 760ED, Win 3.11 für Unterwegs.
    achja: GA-7IXE4 Sockel A Board, Voodoo 5 5500. Die LAN Schlampe, eines Tages bekommt sie anständiges Zuhause.
    Gigabyte-G5AA, Matrox G450DualHead, AMD K6-2, Terratec EWS64XL (64MB RAM) - Keyboard MIDI Workstation

    Nur ein Klassiker ist'n Klassiker. 3dfx und BMW

  • Yes, those parts are covered in black because they are actually saying what the board is/does :) And yes, it's a 3dfx related project, as was the custom PSU :)

  • DE (Google Translate): Ihre Antworten waren ziemlich genau richtig. Dies ist eine Zusatzkarte (keine Änderungen erforderlich) für fast jede V2 (funktioniert auch mit V2 SLI). Mit wenigen Änderungen kann es auch mit V1 funktionieren. Es fügt DVI über den HDMI-Anschluss hinzu und unterstützt HDMI 2.0-Durchgang. Es ist ein reiner Digital-Digital-Wandler, der die Daten direkt vom FBI-Chip abruft. Schließlich werden auch einige andere Funktionen diskutiert.

    -------------------------------------------------------------------------------------------------------------------------------------

    EN: Your answers were pretty much spot on. This is add-on board (no modifications needed) for almost any V2 (works with V2 SLI too). With few modifications it can work with V1 too. It adds DVI via HDMI connector and supports HDMI 2.0 passthrouth. It is a pure digital to digital converter as it grabs the data directly from the FBI chip. Eventually few other features are also in discussion.

    2 Mal editiert, zuletzt von EMPEROR (25. Juli 2020 um 21:36)

  • AH!

    Also umgehst du den DAC völlig? Ahahaaa, genial! Ich hätte nie auch nur an sowas gedacht! :thumbup:


    AH!

    So you're completely bypassing the DAC? Ahahaaa, that's genius! I would've never thought about something like that! :thumbup:

    1-6000-banner-88x31-jpg

    Stolzer Besitzer eines 3dfx Voodoo5 6000 AGP Prototypen:

    • 3dfx Voodoo5 6000 AGP HiNT Rev.A-3700

    [//wp.xin.at] - No RISC, no fun!

    QotY: Girls Love, BEST Love; 2018 - Lo and behold, for it is the third Coming; The third great Year of Yuri, citric as it may be! Edit: 2019 wasn't too bad either... Edit: 2020... holy crap, we're on a roll here~♡!

    Quote Bier.jpg@IRC 2020: "Je schlimmer der Fetisch, desto besser!"

  • Sieht bissl aus wie bei meinen Turbokarten in den Amigas.

    Permanent aufgebaut:
    A7V133, Athlon 1,4GHz, 512MB, GeForce3 Ti200 128MB, SB Live! X-Gamer
    Für die LAN:
    TUSL2-C, PIII-S 1,4GHz, 512MB, GeForce2 GTS 32MB, 2x Monster II 12M, SB Live!
    TUSL2-C, PIII-S 1,4GHz, 512MB, GeForce2 GTS 32MB, 2x Monster II 12M, SB Live!
    CUSL2-C, PIII 933MHz, 512MB, G400 Max 32MB AGP, 2x 3D Blaster Voodoo² 12MB, SB Live!
    CUSL2-C, PIII 933MHz, 512MB, G400 Max 32MB AGP, 2x Monster II 8MB, SB Live!

  • DE (Google Translate): Pass-Through-Teil ist alles, was Sie auf den Eingang setzen, Sie bekommen auf den Ausgang. V2-Teil ist Standardauflösungen. Kein zusätzlicher Treiber oder Änderungen erforderlich. Als besprochene Idee könnte es sich um eine Hochskalierung und / oder Änderung des Seitenverhältnisses (bei Bedarf mit schwarzen Streifen) mit einem kleinen Bedienfeld handeln, aber das Projekt befindet sich noch in der Entwicklung, also werden wir sehen.

    -------------------------------------------------------------------------------------------------------------------------------------

    EN: Pass-through part is whatever you put on the input, you get on the output. V2 part is standard resolutions. No extra driver or modifications needed. As an idea discussed might be upscaling and/or change of aspect ratio (with black stripes where needed) with a small control panel, but the project is still in development, so we'll see.

    Einmal editiert, zuletzt von EMPEROR (25. Juli 2020 um 21:36)

  • I think lommodore wants to say "deepl.com" , not deeol

    Yes, i can also recommend "deepl.com" over the google translator.

    But wow... That's amazing. It this Socket, which "bites" onto the chip, it reminds me a lot of amiga.

    That's pretty neat. And it shows your skills, when you can grab the raw-data signals and transform then into HDMI.

    IBM ThinkpadX31 der kleine Pinguin für unterwegs
    2x AMD Opteron 246 (ehm. 244er) 4 GB RAM, Tyan K8W Tiger eine "Troye" Linux Workstation für den Power-User,Debian, 7 3.2.0-4 amd64
    Thinkpad 760ED, Win 3.11 für Unterwegs.
    achja: GA-7IXE4 Sockel A Board, Voodoo 5 5500. Die LAN Schlampe, eines Tages bekommt sie anständiges Zuhause.
    Gigabyte-G5AA, Matrox G450DualHead, AMD K6-2, Terratec EWS64XL (64MB RAM) - Keyboard MIDI Workstation

    Nur ein Klassiker ist'n Klassiker. 3dfx und BMW

  • DE (deepl.com): Das Verdienst gebührt meinem Freund Daniel aus Rumänien. Er ist der Drahtzieher hinter diesem Projekt (und vielen anderen) und meiner Meinung nach einer der fähigsten Köpfe, die ich je getroffen habe.

    DE (Google Translate): Der Kredit geht an meinen Freund Daniel aus Rumänien. Er ist der Mastermind hinter diesem Projekt (und vielen anderen) und meiner Meinung nach einer der kompetentesten Leute, die ich je getroffen habe.

    EN: The credit goes to my friend Daniel from Romania. He is the mastermind behind this project (and many more) and in my opinion one of the most skilled guys I've ever met.

    P.S. Not really sure which translation is better. You tell me :)

  • Er greift die Daten direkt vom RAMDAC ab, der hat ja schließlich auch Eingänge...

    Diese Idee hatte ich auch schon mal. Ich hielt allerdings einen externen Wandler für sinnvoller.

    Tolle Idee!

    "Du bist und bleibst a Mensch und du kannst eben net deine menschlichkeit überwinden."

    Dennis_50300

  • yes !!! its Daniel Projekt :) He is a true 3dfx dedicated and passionate skilled person :)

    is always a pleasure to discuss with him different 3dfx projects !

    Nice too see its project posted here too.

    Im also very curious to see the results of the v2 HDMI :)

  • @GoldLeader, i first thought, that the device can hookup to the VESA connector, because of the flat-ribbon cable. I imagined, i would perfectly fit to these VESA pin headers.

    But as far as i remember, it possible to connect some Laptop LCD Screens (you know, these typical 640x480 @ 65365 colors -16bit-).

    So maybe there is a chance, that the VESA connector provide enough data-signals and they'd be useful.


    As far from that: EMPEROR: i think the deepl.com translation works better. I'm astonished about the german word "Drahtzieher", that describes it perfectly.

    The word "Drahtzieher" has some (but all posivitely) weird twist to it. Like a master of the dark arts, a guru. The mage who is in control of all puppet strings :)

    IBM ThinkpadX31 der kleine Pinguin für unterwegs
    2x AMD Opteron 246 (ehm. 244er) 4 GB RAM, Tyan K8W Tiger eine "Troye" Linux Workstation für den Power-User,Debian, 7 3.2.0-4 amd64
    Thinkpad 760ED, Win 3.11 für Unterwegs.
    achja: GA-7IXE4 Sockel A Board, Voodoo 5 5500. Die LAN Schlampe, eines Tages bekommt sie anständiges Zuhause.
    Gigabyte-G5AA, Matrox G450DualHead, AMD K6-2, Terratec EWS64XL (64MB RAM) - Keyboard MIDI Workstation

    Nur ein Klassiker ist'n Klassiker. 3dfx und BMW

  • Hmm I see, very interesting, makes me wonder has anyone ever tried using a VESA connector even with a Voodoo5 6000 for example or any 3dfx card for that part?

    Since they were all added to all 2D /3D 3dfx based VGA cards, makes me wonder if they actually worked or even had a useful purpose, hmm.
    This project does look similar to that what I had in mind yea.