unfortunately i have zero experience with sis chipsets. my advice is to stick with well-known platforms with maximum compatibility.
although some exotic configs may work fine: https://www.youtube.com/watch?v=gWXcQwZsIog
ive had this same issue on via chipsets too I have the epox 8ka5a2+ and I have the same problem on that board. I only ever got it to work once on that board and I've not been able to replicate what ever I did to make it work.
Hello has any other strange god owner encountered code 24 error with the card under windows 98/me I’ve been unable to get the card to work works perfectly fine in windows 2k but nothing in 98/me
which drivers and system config?
ATM im running a sis651 board with 2.8ghz Pentium 4 1 gig of ram. as for drivers I've installed directx9c and the agp drivers for the board. I've tried the reference drivers Amigamerlin and the some what new widescreen drivers but all of them just give me code 24 after installing.
Hello has any other strange god owner encountered code 24 error with the card under windows 98/me I’ve been unable to get the card to work works perfectly fine in windows 2k but nothing in 98/me
Perhaps I’ll have to dm backfire see what he thinks.
did you connect power the wrong way around?
I think Backfire might be able to fix it.
I made double sure I swapped to a different cpu to try then boom. The board still works just fine with regular p4s no problem so I guess it’s not a total loss.
Rest in peace ct-479
So this just went from bad to really bad something on the adapter Jsut caught fire and exploded
So I found a power connector for it but still - -
cpu doesn’t heat up
I just realized I don’t have the power cable it’s asking for heck… I guess my next question is does anyone know the Pinout of that power connector so I could make one
Hello I recently after a long long time of looking managed to acquire an asrock m266a r3.0 I’ve seen a few people have gotten this board to work for the ct479 but I don’t seem to be able so I’m hopping someone might have the answer to my problem. I don’t have the original cooler so I just put a zalman cooler on top of it and I get - - no cpu detected.
The xpc shuttle ss51g is natively compatible with the voodoo 5 5500 and also has the sis651 chipset has anyone ever tested the board for v56k compatibility?
Hallo Lmbue, haben Sie das Kabel mit einer Agp 8x Grafikkarte ausprobiert?
Deutsch
Hallo Lmbue,
haben Sie das Kabel mit einer Agp 8x Grafikkarte ausprobiert?
Hi Lmbue,
have you tried the cable with an Agp 8x graphics card?
I haven’t spent money on any yet I’m looking for one that works with agp 2x. So I can use it with 3dfx cards.
I am looking for one as well. So if I find one, I will let you know.
That would be very helpful thank you.
Hmm well i guess ill have to keep looking
I have a bunch of AGPx8 riser-cables...or let's say they were sold as it. None of them worked.
damn I wonder if anyone has a source for ones that actually work haha.
I’ve noticed online there are a few agp 8x riser cables but I was wondering if there might be agp riser cables compatible with agp 2x so I could pair them with a 3dfx card.
Alles anzeigenAlles anzeigenThe 8K5A2+ & 8K5A3+ are the same only the 3+ has 4 UATA 133 connectors for the Highpoint 370 RAID chip as where the 8K5A2+ has 2 just like the 8K3A+ has and my 8K7A+ has as well
Nice find btw, from who did you get that board?
I haven't got such a board. I only know that it exists.
I own an Asus A7S333 Rev. 1.03 (SiS 745). On page 2, the manual states "SiS745 Chipset supports AGP 4X/2X mode." However, I have no idea and cannot find any information about whether its AGP is 1.5 V only or also 3.3 V. The slot itself is realized as Universal AGP.
FSB is limited to 133 MHz, 166 MHz is only for memory clock. So performance is it not really fast.
EDIT:
On page 60 of the manual one can read: "AGP Capability [4X Mode] This motherboard supports the AGP 4X interface that transfers video data at 1066MB/s. AGP 4X is backward-compatible, so you may keep the default [4X Mode] even if you are using an AGP 1X or 2X video card.
[1X Mode] provides a peak data throughput of 266MB/s even if using an AGP 2X/4X card.
[2X Mode] provides a peak data throughput of 533MB/s even if using an AGP 4X card.
Configuration options: [1X Mode] [2X Mode] [4X Mode]"
It reads like this board supports 3.3 V on AGP as AGP 1x and 2x cards are 3.3 V only.
But is this for sure?
The only SIS chipset that is safe from my own knowledge is the S645 chipset and definitely not the SiS745.
For all I know I can't state that as being sure because i have no experience with Pentium 4 in general only chipsets I used with Intel i850 for Socket 423 & Intel i860 for Socket 603 extremely robust and stable, but not ok for 3dfx AGP boards, except the Voodoo4 4500 AGP of course and the all the PCI 2.1 liveries Voodoo3 and up.
a 5500 AGP might work but a 6000 is a different beast to tame and things may go bad even if you try booting the system.
Not every board of the same chipset was listed basically we tested on with what we had and some of the 6K owners found out that some boards of the same chipset from different brands were a total no go as where others were.
Why this is a thing even today is a mystery to me, but it would be nice to pan that out for once and for all, so test your board with a 5500 AGP see what it does as for the 6K Anthony's cards use PLX they might work but this still says nothing for the original 3dfx Voodoo5 6000 Revisions, PLX is not HiNT even they play a similar role, that I know by heart, as maker of the world owner list for Voodoo5 6000 & 5000 owners.This might be kind of a silly question but if I wanted to purchase one of these voodoo 5 6000 reproductions I would want to message Anthony correct?
And yes you would you can send him a dm here via Voodoo Alert or contact him via his facebook page which can be found here:
https://www.facebook.com/zxc64.hw
Alright thank you 
This might be kind of a silly question but if I wanted to purchase one of these voodoo 5 6000 reproductions I would want to message Anthony correct?
Ah alright well I guess likely I’ll have to find another one in that case.
