Posts by ciacara72

Hi Chosen_One, thank you for reporting the error to me.

my English continues to be bad ...

Updated first Post with images and news of the Special Unified Xcelerator 3rd Series.

Guys, please, after the bare PCBs arrive for Anthony to assemble, have patience and give him time to do the assembly of the components and to test everything well, so you will all be sure to have your Snow White perfectly assembled and tested. Also calculate, after assembly, the shipping times from the developer's laboratory to your home. Be patient and Congratulations to the future owners of Snow White.

Best Regards.

Quote from Raff

Well, 3DMark 2001 SE actually tells one thing: Voodoo cards suck. And, to be honest, that was a quite accurate forecast - games after 2000 tend to be both TnL and interface limited.

Best regards,
Raff

Hi Raff,

I think 3dmark01's answer is not "they suck", but it is "we did not expect the 3dfx community to support, after the bankruptcy, until 2021, making it survive thanks always to the fans of this community!"

Best regards.

Hello to all,

I am happy with this initiative of Bier.jpg and I am happy that Anthony has given the possibility to this community to make an exclusive order of personalized Snow White.

I will not advertise this sale on other channels because I believe it must remain within the walls of this Forum.

If Anthony sees fit, she'll do it on her FB page, and then I'll share the announcement.

Gold Leader, I think it's the right time to order your Green V5 6K by Anthony, you only have three days left to think about it

Good continuation.

Hi Tormi2k, congratulations on your new purchase and thank you for taking the time to test and share your results.

Dear Marlon and Backfire, due to the disappearance of the V2 chips from the various stock, as happened with the VSA-100 320 chips, I think we would never know if it is possible to recreate a multiple SLI with V2. Unfortunately development would be useless without chips. And I don't even want to think about destroying V2s to get 3dfx chips.

Thank you Gold Leader, but the credit goes to Batyra and Anthony.

My contribution is limited to the publication of photos, news, curiosities and some reviews.

Dear Tweakstone, I volunteer, with great sacrifice, to keep your original prototype of the 3dfx voodoo5 6000 Agp, so I give you the chance to buy a beautiful Snow White. It will be hard for me, but I hope to succeed in this great sacrifice ...

Updated Thread title and first post with new photos of the video card and the New box created for Snow White.

Hi IceFire, interesting topic, I subscribe to the discussion, I think Anthony may also be interested

Quote from feinripp

Thanks, and great insights! This could be true, in all cases I used either the PCI or the PCI-e riser cable, since the enclosures would not have space for the VGA output. I even thought about relocating the VGA output and probably would do so if I wanted a permanent solution.

But then again it worked with the Razer Case where I also used a riser cable...

Do you remember your: "It just works ™"

Hardware is unpredictable, sometimes hardware that works perfectly on one MB doesn't work on another. Just take out the small card with the pci-e slot and try it out of the egpu case. So you also eliminate this doubt.

I have had experiences with unexplained pci, agp and pci-e flat extensions. The length of the extension for example:

Pci-e 20cm extension cable, replaced three times thinking about a defect in the extension cable, did not work on a given motherboard. While the same extension worked perfectly on other motherboards. It was enough for me to buy the same extension but 15 centimeters to use it on any motherboard. Same thing with the agp and pci extensions. All inexplicable, but it is so unfortunately ...

If the voodoo2 with direct riser in the pci-e slot works, then you will proceed, if you wish, to the modification of the egpu case.

Quote from feinripp

Übersetzung des Artikels auf meiner Webseite: 3dfx Voodoo 2 with any* Windows 11 system - robertkrau.se

Leider funktioniert das Ganze nicht, es erscheint der Fehler “glide2x.dll expected voodoo graphics, none detected” beim Starten des Spiels, egal was ich probiert habe. Ich bin ein bisschen traurig und nehme an, dass es daran liegt, dass das eGPU Gehäuse einenanderen Controller Chip hat (JHL7440 vs DSL6540 of the Razer Core X).

Hi feinripp,

thank you for sharing your experiment, perfectly successful, I congratulate you!

Your enthusiasm when starting Unreal Tournament Intro reminded me of my amazement when I managed to start a voodoo5 5500 agp, first on an Abit AN7, then on an Asrock 4coredual-sata2 motherboard: my reaction was the same as yours , super enthusiastic and amazed, but immensely happy. You did well to document this event ...

The credit for the failure to detect the v2, in my experience, this type of error is due to a loss of signal due to the Flat extension of the Riser pci-to pci.

Have you already tried to insert the voodoo2 ner riser pci-to-pci-e directly, directly into the pci-e slot, without any extension cable / flat cable?

I hope that the meaning of what I have written is clear. If I wrote in German, I would surely have obtained a worse result than this, and incomprehensible ...

Hi villeneuve , the website is under construction, there is no time to complete it. As soon as the sale is announced I will also announce it here and I hope that the website has also been completed.

Otherwise we will find another alternative solution

Quote from Sajuk

I have no Facebook

Hi Sajuk, I sent you a PM

Quote from Sajuk

What do you think this card will cost approximately?

Hi Sajuk , you will find all the details on the developer page, you can also send him a PM: Anthony ZXCLXIV

Ok CryptonNite , message received, thanks for the explanation.

S2 Sedan & Gold Leader

For questions about the color, the agp4x version, the 256mb on board, I could answer you but not in detail.

I would prefer developer Anthony to give you the right directions and answers. Maybe we can also find solutions by talking about it here, where it all started, at least in part.

Quote from CryptonNite

Langsam wirds langweilig...

Hi CryptonNite , Do you mean the threads I create or Anthony's creations?

However, in both cases, I am sorry not to have your consent.

Updated first post

Quote from erek

Quote from ciacara72

Thank [user = '3659'] erek [/ user]!

Obsidian3D 3Dfx 50-4400 Rev B 8MB 3D Voodoo 1 + AMETHYST Daughter Card (+4MB)