dein v5 6k sys sieht nett aus GAT. =)
das Case könnte allerdings mal eine reinigung vertragen
3dfx Grafikkartenbilder thread
-
-
Da wird mal wieder Mr. 1800Watt Staubsauger durchputzen.
-
Zitat
Original von Kaitou
Can I come visit you and buy one?Visitors always welcome, all spare machines spoken for though.
Some of the AA machines shown in the picture are not mine anymore, I thought one group shot before packing would be nice.
Nice job on the case, very tastefull!
-
Zitat
Original von gdonovan
GrandAdmiralThrawnNice job on the case, very tastefull!
Thanks a lot!
I decided to put the 3dfx Voodoo TV FM to good use in that system too, better that, than letting it lie around as a dust catcher for the years to come:
Built in:
[Blockierte Grafik: http://www.xin.at/thrawn/pics/hw/v5-6000/v5-6000-aliveagain_inside_5.jpg]Operating:
[Blockierte Grafik: http://www.xin.at/thrawn/pics/hw/v5-6000/v5-6000-aliveagain_inside_6.jpg]Just one more PCI free, any ideas on how to occupy the last slot?
-
@GAT: Ich würd' die PCI Karten in anderer Reihenfolge verbauen; die größeren nach unten, die kleineren nach oben. Und den obersten PCI Slot würd' ich ganz frei lassen. Alles, damit die Voodoo nicht überhitzt.
Hängt da eigentlich kein Diskettenlaufwerk dran? -
Zitat
Original von GrandAdmiralThrawn
Just one more PCI free, any ideas on how to occupy the last slot?
Wie wärs mit ner Voodoo Graphics
ohne loop kabel und den PCI mit tape zu dann gibts auch keine probleme -
@ GAT
Use a 5500 PCI or PC flashed 5500 PCI Macintosh in that slot for VGA 2
-
Nah, I'm not really that interested in 5500 cards anymore (don't have or need a Mac v5 5500 anyway), and REALLY not in a second VGA card for the 6000 System, especially not another D3D/Glide/OGL capable device. No Dual-Monitors planned either. I'm thinking about something multimedia, hmmm...
ZitatOriginal von Exxe
Wie wärs mit ner Voodoo GraphicsDas wär eine Idee, für die echt alten Spiele wie Schleichfahrt, die Orchid Righteous 3D hätt ich ja noch da.
ZitatOriginal von SK1@GAT: Ich würd' die PCI Karten in anderer Reihenfolge verbauen; die größeren nach unten, die kleineren nach oben. Und den obersten PCI Slot würd' ich ganz frei lassen. Alles, damit die Voodoo nicht überhitzt.
Die hat da schon noch genug Luft, die VSA-100 AAVID Kühler sind ja nicht wirklich hoch. Selbst wennst da direkt unter der 6000 noch eine Karte einbaust, ist da ja noch genügend Platz zum Ansaugen von Luft, und momentan ist noch ein Slot zwischen der VoodooTV FM und der 6000. Ich glaube, um die 6000 in ernsthafte thermische Bedrängnis zu bringen brauchts schon schlimmeres, die hält ja arg viel Hitze aus, und die paar Low-Power Karten da machen ja ned viel aus.
-
naja mit ner laufenden v1 gibts nachher wieder triberprobleme.......
richtig viel wär noch ne karte mit voller baulänge z.B. ne Matrox g200 MMS mit 4GPUs und 4 Monitoranschlüssen -
Ich hab ja einen 19" CRT dran, und das System soll noch transportabel sein, wie oben gesagt, Multimonitoring kommt da nicht in Frage. Hätte auch keine wirkliche Verwendung für eine MMS und noch weitere Schirme an dem System (geht das mit Win98 überhaupt gescheit?!).
Edit: Volle Baulänge? Hmm, ich hätte noch einen Promise SuperTrak SX6000 da, aber da gibts glaub ich gar keine Win9x Treiber. Oder die X-24? Nah, die bringts auch nicht, da wär die v1 noch besser (Für Schleichfahrt etc.)
-
Multimonitoring (Bildschirm erweitern) geht unter Windows 98 SE absolut problemlos.
-
Osckhar has some great 3dfx Prototypes, so I present his new photo's!
naming cards from top to bottom:
Osckhar's V4 proto's:
http://www.imagehosting.com/out.php/i1311423_V44500family.jpg
3dfx Voodoo4 4500 PCI 32MB + DVI Rev.A 3000
3dfx Voodoo4 4500 PCI 32MB + TV-Out & DVI Rev.A 2700
3dfx Voodoo4 4500 PCI 32MB Rev.A1 4499 Copper Oven Board
3dfx Voodoo4 4500 AGP 32MB Rev.A0 3000
3dfx Voodoo4 4800 AGP 64MB + TV-Out & DVI Rev.A0 2600
3dfx Voodoo4 4500 AGP 32MB + TV-Out & DVI Rev.A0 2600
3dfx Voodoo4 4500 AGP 32MB L-Card Rev.A 2600Osckhar's V5K proto's
http://www.imagehosting.com/out.php/i1311422_V55000family.jpg
3dfx Voodoo5 5000 PCI 32MB Rev.A1 0900
3dfx Voodoo5 5000 PCI 32MB Rev.A0 4899
3dfx Voodoo5 5000 AGP 32MB Rev.A0 3700Osckhar's V5K5 proto's
http://www.imagehosting.com/out.php/i1311421_V55500family.jpg
3dfx Voodoo5 5500 AGP 64MB Rev.A0 1400
3dfx Voodoo5 5500 AGP 64MB Rev.A1 0900
3dfx Voodoo5 5500 PCI 64MB Rev.A1 2300 "Golden Sample"
3dfx Voodoo5 5500 AGP Macintosh 64MB + DVI Rev.A2 3300
3dfx Voodoo5 5500 AGP 64MB Rev.A2 3700Osckhar's V6K proto's
http://www.imagehosting.com/out.php/i1311420_V6kfamily.jpg
3dfx Voodoo5 6000 AGP 128MB Rev.A 3700
3dfx Voodoo5 6000 AGP 128MB Rev.A2 2600
3dfx Voodoo5 6000 AGP 128MB Rev.A1 15003dfx Large Legacy four pinned VoodooVolts
2x Late single pinned VoodooVolts [Rev.A 0030 possibly.]
Great stuff Ossie!!! -
woah, nice prototypes osckhar got there
-
Zitat
Original von Turrican
woah, nice prototypes osckhar got there
yeah some sick shit allrighty haha
must of cost alot of cash I'd bet unless he had some recieved as gifts heh a wish for any 3dfxer :baby:The Funny thing is Osckhar only has prototypes afaik and some Q3D cards.
-
Yes, his VSA100 collection is absolutelly amazing!
Even a real 4800 he has.
And he also put a senseless 'Wing' (plastic holder) on his extra short V56K (the one in the middle), just like I did with mine!The photos are okay, too. Well, a little extra light would not be bad, but that's just my personal opinion. =)
-
well that bracket isn't senseless it's made for full length cards as an Extension support bracket which has this purpose:
[Blockierte Grafik: http://www.imagehosting.com/out.php/i1311619_q3dv6kbracket.jpg]Also something nice thanx to SK1 he made a gif file to show the comparence of the two 5000 PCI's the Rev.A0 4899 and the Rev.A1 0900:
[Blockierte Grafik: http://img91.imageshack.us/img91/1222/5000pcisc0.gif]the Rev.A0 4899 has SMD's on places where there are Elko's on the Rev.A1 0900 as the Second VGA area has some differentials too
-
I know that, Obi, but the "shorter V56Ks" are just too short to use them; the bracket only hangs in the air.
-
Zitat
Original von SK1
I know that, Obi, but the "shorter V56Ks" are just too short to use them; the bracket only hangs in the air.
yeah you're right there heh an Air Hang'n Extension Support Bracket
so much for the support haha -
Da hab ich auch mal meine Digicam rausgekramt.
[Blockierte Grafik: http://www.on-wing.de/pictures/411570.jpg]
Hat nicht vielleicht noch jemand ne Spectra 2500 über? die würde super zu meiner 3D2 passen =)
viele Grüße
Marian
-
Zitat
Original von GrandAdmiralThrawn
Thanks a lot!
I decided to put the 3dfx Voodoo TV FM to good use in that system too, better that, than letting it lie around as a dust catcher for the years to come:
Built in:
[Blockierte Grafik: http://www.xin.at/thrawn/pics/hw/v5-6000/v5-6000-aliveagain_inside_5.jpg]Operating:
[Blockierte Grafik: http://www.xin.at/thrawn/pics/hw/v5-6000/v5-6000-aliveagain_inside_6.jpg]Just one more PCI free, any ideas on how to occupy the last slot?
Tolle Arbeit! Viel Spaß mit dem guten stück
-